In almost every home, you can find a toolbox with plenty of them Screws, nuts, nails and endless tools; In others, this dish is forgotten in a drawer.
Maybe we’re waiting for the moment to give them a second life, but we don’t know what to do with them, or maybe we just don’t know where to dispose of them without causing harm. environment, so we offer a solution to both problems.
1. In the absence of a key chain, nuts and laces
If you are missing a key chain and want to improvise or give it as a gift handmade All you’ll need is a re-used ring from another key chain, a nut, and your favorite color of ribbon, rope, cord, or paracord.
Once you’ve made your choice, the next step is to fold the cord in half and feed it through the folded part into the ring and then bring the end of the cord itself in, tying a knot.
Once tightened, insert the two ends of the wire, one on the inside of the nut, until it is snug, and repeat the process across four or more nuts, depending on the length of the key chain you prefer.
Finally, we twist the knot so that the last nut does not come out. To give the final touch, we can add some small nuts to the end of each piece of wire, tying a knot at the end; You can even paint the nuts or mix them with their characteristic silver or gold tones.
2. POCKET PRACTICALITY: Keys are attached with a screw, nut and washer
Sometimes, if we carry a lot of keys and don’t want them to take up space in our pockets, the key ring can be a little annoying. To avoid this without carrying all the loose wrenches, you’ll need a screw with a washer first. The latter will not need to fit perfectly, but should not come off the head of the screw.
After inserting the washer into the base of the screw, you just need to insert the keys. After inserting, close the tandem with the nut at the bottom and adjust everything with a strong enough screw so that it does not break, but without using too much force, so that the keys have a little movement and you can slide them to your liking. in.
3. Ideal decoration: a picture of nails and thread
This is, without a doubt, one of the most popular decoration options, and no less. It’s called Hilorama, and in addition to giving you the ability to reuse your nails, it lets you create all kinds of drawings while having fun.
For this you need a wooden base, string or rope and a hammer. Although the design you want can be done by hand or as a printed template, we’re going to illustrate it with a heart shape to give a simple example.
To begin with, we’ll put the printed heart template on the bottom with a bit of tape so that we can remove it later. After gluing, we hammer the nails into the outline of the heart with the help of a hammer, with a distance of about one finger thickness between each nail.
After removing the template, a heart shape based on the nail will remain. The next step is to tie the thread tightly to the nail at the bottom of the heart and cut off the excess knot.
Then, you need to pass the thread through the head of each nail sequentially until you make the contour of the figure. This will be when your imagination starts to fly and you will have to fill the heart with thread and connect the nails that you prefer with thread.
4. Make iron fertilizer for plants
That is, make your own soluble iron liquid on the plants and replace the one that collects the lime that carries the irrigation water in many areas of Spain.
All you need are some iron screws, nails or small scraps you have left over, a teaspoon of sulfur used in gardens to kill fungus, an empty plastic water bottle and some distilled water.
The process is very simple, although it takes a week to get the right liquid fertilizer, but once it is achieved, the iron remains for a long season:
- Pour a stream of water into the empty bottle
- Add the screws, cover and shake well to oxygenate the mixture.
- Add a teaspoon of sulfur powder, cover and shake.
- We leave the mixture in the bottle, to be stored horizontally so that there is an exchange surface between the internal air and water with screws.
- Pour the mixture into the bottle daily for a week or more.
- We will have an iron-rich liquid ready, part of which we can pour into another bottle full of water and save the rest.
- We water with a full bottle, the water of which will be rich in iron.
This video explains everything very graphically:
Where can I recycle my leftover nails, nuts or bolts?
Many elements that we find in our home are made of metal, among which screws, nuts, nails and other construction equipment stand out.
After they are no longer useful – and if we do not dare to give them a second life through handicrafts – the question may arise, where should we dispose of them in order not to harm the environment.
The answer is simple: clean ground. In addition, since they are light containers and do not take up space at home, we can collect them and take them to these places without any problems for further collection and recycling. Sometimes, they can take it to their own workshops or hardware stores so they can rework it for you.
This simple act mainly serves to improve the situation of environmental pollution, since by recycling it will be possible to make pieces that require much less water, air and energy to produce them.
Source: El Diario